LITHIONICS BATTERY WARRANTY PAGE

LITHIONICS BATTERY WARRANTY DETAILS
- PLEASE NOTE THAT THERE ARE 2 SEPARATE WARRANTY COVERAGES
(OEM CUSTOMERS & RETAIL CUSTOMERS).
Please feel free to ask us which will apply to your purchase if you are unsure.

1.) Lithionics Battery Original Equipment Manufacturers (OEM) Dealer Warranty for Pinnacle Innovations as an Authorized Dealer.
NEW: NOW 5 YEARS OR UP TO 6,000 CYCLES (2,000 CYCLES AT FULL DEPTH-OF-DISCHARGE CYCLES).

1.a) Batteries equipped with NeverDie Battery Management System (BMS) - Effective October 18, 2020:
When used correctly, Lithionics Battery warrants your battery to be free from manufacturing defects for a period of 5 years. Also, when used correctly, Lithionics Battery warrants your battery to deliver a minimum of 2,000 cycles at full depth-of-discharge or up to 6,000 cycles. This Warranty requires that either the Bluetooth or round SOC gauge be installed and other requirements.

Lithionics Battery OEM Warranty Details

Click on the PDF logo for the updated Warranty PDF for OEM Applications.

Please Contact Us for the complete Lithionics Battery OEM Warranty Statements PDF for full details and limitations...

Lithionics Battery Standard Purchase Terms

For more Warranty information,
Please Email Us: siteinfo@shaw.ca

2.) Lithionics Battery "Retail Customers" Warranty
"Warranty Versus Guarantee"

2. a) Batteries equipped with NeverDie Battery Management System (BMS) When Lithionics Warranty Conditions Can Be Met:
When used correctly, Lithionics Battery warrants your battery to be free from manufacturing defects for a period of 5 years. Also, when used correctly, Lithionics Battery warrants your battery to deliver a minimum of 2,000 cycles at full depth-of-discharge or up to 6,000 cycles. This Warranty requires that either the Bluetooth or round SOC gauge be installed AND the following requirements are met:

• You completely disclose all of the electrical devices (charging and load devices) to us.
• You follow our straight forward best practices which include but are not limited to using the correct gauge of high quality copper or tinned copper marine power cabling, using high quality tinned copper cable ends that are hex crimped (6-way crimp) and sealed with adhesive backed heat shrink tubing.
• You only connect one main power cable to each of the battery/ BMS box terminal studs which will connect to a bus bar where you make all your system connections. Placing multiple cables on a single Lithionics terminal may Void your Warranty.
• You use a knowledgeable or licensed and experienced installer (some cases of self-installation can be covered).
• You select an appropriate environment to install the components (temperature controlled is preferred and free of moisture/ dripping water etc.)
• You provide detailed high quality photos of the Lithionics Battery components installed. These photos need to be from 1,200 to 2,500 pixels wide and show the system as a whole as well as close up photos of the battery system connections and EURO DIN cable connections if applicable.
• You have an appropriate short-circuit main fuse connected inline on the positive battery system cable to the bus bar(s). Consult with us if you are unsure what fuse type/ value to use.
• Additional Conditions that may apply to certain projects.

LITHIONICS BATTERY CHARGING DETAILS

12 Volt Automotive Engine Start Batteries (Excerpt taken from detailed .PDF linked below):

4. Charging Your Battery

4.1 - Supported Chargers:
Lithionics Battery 12V engine start batteries can be charged with either a 12V rated alternator in proper working order or a Lithionics Battery LiFePO4 Charger. Failure to do so will void the battery's warranty. Other chargers are factory approved but you must report that charger to the factory in an email request to Pinnacle Innovations (getlithium.com) at siteinfo@shaw.ca and obtain formal approval.

4.2 - Connecting Your Battery to a Charger:
Step 1.
Verify that the battery output is ON. This can be done by checking that the red pushbutton LED is lit or by checking that battery voltage is present with a multi-meter.

Step 2.
1st: Connect the RED (positive) charger lead to the positive terminal on the battery.
2nd: Connect the BLACK (Negative) charger lead to the negative terminal on the battery.

Step 3.
Plug the charger into a wall outlet and turn on the charger, your battery is now charging!

Click here to View the Complete 12 Volt Engine Start Battery With NeverDie User Manual for full details...

LITHIONICS BATTERY SOLAR POWER CONTROLLER DETAILS

All 12 Volt Lithionics Battery Lithium ion Batteries need to be charged between 14.2 Volts and 14.4 Volts. Due to variability in Voltage output of Solar Charge Controllers we recommend that you set the Bulk/ Absorb Voltage of Solar Charge Controllers to 14.2 Volts. The Batteries also need to "Float Charge" at 13.4 Volts.
Visit our Alternate/ Off-Grid Energy and Micro Grid page for more information on Solar and Wind Energy...

Not all Solar Controllers have safety features or adjustable voltage settings. Typically, only 3-Stage Solar Controllers can be adjusted to the Voltages listed above or have a "Gel Battery Setting".

Get Lithium and Lithionics Battery have found that some Solar Controller Models by Victron Energy and OutBack meet our requirements. Get Lithium and Pinnacle Innovations will be happy to bring these in for your application.
Click here to visit our "Solar Charge Controllers" page.

Click here to visit our "Solar Panels" page.

See a few examples of Solar Controllers by Victron Energy (see Victron Energy MPPT solar charge controllers on our solar page).