LITHIONICS BATTERY STATE OF CHARGE METER SYSTEM

SALES: 604-510-0800 or siteinfo@shaw.ca

400 Amp Rated 12 and 24 Volt SOC System
Built-in

State of Charge computer and sending unit built-in with either an internal BMS battery or built-in with an external BMS box. 400 Amp rated, 12-24 Volts.

The cost of the sending unit is included with the "Advanced Version 8 BMS Pricing" so the additional cost to complete the system is the 2 1/16" round display gauge that comes with a plug and play 24' communications cable. Additional cable lengths available at additional cost.

NOTES:

• When net battery charging occurs, there will be a plus symbol "+" in front of the digits. In the image above on the lower line, a reading of "+2.3 A" would mean we are net charging the battery 2.3 Amps.
• The display gauge will turn off if no electrical activity is detected. Just press either white button and the gauge will wake up.
• After a short time, the green LED lamp will also turn itself off. Press either white button and the lamp will come back on.

Click on the image to see a larger graphic of the gauge pod installed on a tour bus as well as a few of the sample readings that the gauge displays.

Please
Contact
Us

IMPORTANT STATE OF CHARGE KIT & NEVERDIE BMS NOTES:
The new Version 8 Lithionics Advanced Battery Management System incorporates "Battery Temperature Monitoring" that can shut off battery power in Extreme Cold or Extreme Hot conditions to ensure that charging does not occur except within the UL listed parameters. This system also interfaces with the State of Charge Monitoring Kit (SOC). As such, for recharging of the battery, we want to make sure the battery is above 0 Celsius or 32 Fahrenheit (we can still discharge at -20 Celsius) or below 113 Fahrenheit (we can discharge up to 140 Fahrenheit). Worth noting is that when the temperatures fall back within the parameters, the system automatically re-latches. We have several ways that we can automatically keep the battery system at optimal temperatures for full operation at all times (charging and discharging) so this is an important subject to discuss with getlithium.com/ Pinnacle Innovations. Lithionics can provide an internal heating system for the batteries that turns on/ off automatically for $519.90 USD for mid and large size batteries (150 Amp hours and higher) and $389.00 USD for select smaller battery models. getlithium.com/ Pinnacle Innovations also offers an external 12 Volt DC 100 Watt heating system or cooling system from $120.00 CAD that is suitable for battery and BMS installations in a sealed or semi-sealed battery compartment.

In addition, if our automated heating or cooling features are not possible, then it is advisable to opt for the "Dual Channel BMS option" (see notes below) that separates the charge and discharge functions of the system. With Dual Channel, even if the battery temperature is outside the recommended temperatures of 32 to 113 Fahrenheit we can let the "Charge Path" on the BMS shut off to prevent charging but the "Discharge Path" remains open and functional so you can power your AC and DC loads. The Dual Channel option is always recommended for Marine Systems (added lightning protection/ redundancy) but it is also highly recommended for battery systems using solar power (susceptible to Voltage spikes that can trigger the BMS High Vltage Cutoff) and now for battery systems exposed to temperature extremes.

Bluetooth State of Charge (SOC) Monitoring System

 

Full Systems Monitoring - Battery Fuel Gauge, SOC Gauge and Error Reporting. Shows:

It is necessary to have the Advanced Version 8 Battery Management System (BMS). Offered as an option for internal or external BMS Box Lithionics Battery Systems.

This option is available for all Lithionics Batteries with built-in Advanced Version 8 BMS as well as the low cost 125 Amp hour AGM Replacement Battery (we can also offer it some of the small/ mid-size 12 Volt batteries such as the 75, 110, 150 and 195 Amp hour lithium-ion batteries).

Works with both Android and iPhone Smartphones. Bluetooth range varies depending on battery system location but is typically 50 to 60 feet.

Ambient power draw is 10 milliamps.

Please take this into account when storing your battery as this could deplete a fully charged 100 Amp hour battery in about 400 Days.

Click here for the
Free downloadable APP
at the Google Play website

$174.44 USD for the Bluetooth circuit board.

NOTE: This option must be ordered with your battery or BMS system.

The downloadable APP is Free at the Apple Store - Search for Lithionics Battery Apps

Click here for the Free download APP at the Google Play site