OFF GRID SOLAR POWER/ MOBILE MARINE AND RECREATIONAL VEHICLE INVERTER/ CONVERTERS AND INVERTER-CHARGERS BY VICTRON ENERGY, XANTREX & OUTBACK POWER FOR USE WITH LITHIONICS LITHIUM-ION BATTERIES

Xantrex Inverter-Chargers and Xantrex Inverters
Made by Schneider Electric/ Xantrex (All prices subject to change*)

Xantrex 8183010 Freedom XC Pro Inverter/Charger, 3,000 Watts
P/N: 8183010

Xantrex Freedom XC PRO Datasheet

Xantrex 8183010 Freedom XC Pro Inverter/Charger, 3,000 Watts with 150 Amp battery charger.

A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 150 Amp battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4F (-20C) to 104F (40C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.

• Built-in communications card
• Highly configurable for a variety of applications
• Ability to charge dead batteries down to 0V
• Designed to charge lithium ion batteries
• On-board 150 Amp battery charger can be programmed to output anywhere from 5 Amps to 150 Amps of battery charge current.
• Exceptional 5 second power surge for motor loads
• Built-in 50A transfer relay
• Transfer Relay AC Current Rating: 50 A surge, 40 A continuous
• DC Nominal Current at Full Load: 304 Amps DC
• Operating Input AC Pass-Through Voltage Range 85-140 VAC
• Operates on 10.1 to 18 Volts DC (default Low Battery Cutoff is 10.5 Volts DC)
• Programmable 120 Volt AC output (for limiting inverter power to say 2,500 Watts etc. - in increments of 100 Watts)
• L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm)
• Weight: 18.6 pounds (8.4kg)

IMPORTANT: Please make sure that there is at least 5" of free air space at the fan end of the unit, allow at least 1" air space all around and at least 2" at the wiring access end. This will assist air flow and cooling of the inverter-charger.

Optional Bluetooth equipped Display and inverter-charger control panel
		Xantrex Display Datasheet PART #808-0817-02

Our Discounted Price is
$3,179.90 CAD*
(MSRP is $3,443.79 CAD)

Xantrex Freedom XC PRO Owner's Guide/ Manual

Xantrex 8182010 Freedom XC Pro Inverter/Charger, 2, 000 Watts
P/N: 8182010

Xantrex Freedom XC PRO Datasheet

Xantrex 8182010 Freedom XC Pro Inverter/Charger, 2,000 Watts with 100 Amp battery charger.

A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 Amp battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4F (-20C) to 104F (40C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.

• Built-in communications card
• Highly configurable for a variety of applications
• Ability to charge dead batteries down to 0V
• Designed to charge lithium ion batteries
• On-board 100 Amp battery charger can be programmed to output anywhere from 5 Amps to 100 Amps of battery charge current.
• Exceptional 5 second power surge for motor loads
• Built-in 50A transfer relay
• Transfer Relay AC Current Rating: 30 A surge, 24 A continuous
• DC Nominal Current at Full Load: 192 Amps DC
• Operating Input AC Pass-Through Voltage Range 85-140 VAC
• Operates on 10.1 to 18 Volts DC (default Low Battery Cutoff is 10.5 Volts DC)
• Programmable 120 Volt AC output (for limiting inverter power to say 1,500 Watts etc.)
• L x W x H (with flanges) 16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm)
• Weight: 17.1 pounds (7.76kg)

IMPORTANT: Please make sure that there is at least 5" of free air space at the fan end of the unit, allow at least 1" air space all around and at least 2" at the wiring access end. This will assist air flow and cooling of the inverter-charger.

Optional Bluetooth equipped Display and inverter-charger control panel
		Xantrex Display Datasheet PART #808-0817-02

$2,387.00 CAD*

Xantrex Freedom XC PRO Owner's Guide/ Manual

Xantrex Freedom SW 3012.
A powerful 12 Volt DC inverter-charger with 3,000 Watts continuous output at 120 Volts AC (6,000 Watts peak). Powerful 150 Amp battery charger and separate AC Inputs/ Output.

A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time.

Unit dimensions: 13.5" x 15.25" x 7.75" tall. Weight: 73.7 pounds. Can be mounted flat (table top style) or vertically with the control buttons facing up.

Simple and easy to install. See one installed on our Installations Page.

Also available in a 2,000 Watt model Fredom SW 2012. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements. The Xantrex Fredom SW 2012 2,000 Watt inverter-charger also measures 13.5" x 15.25" x 7.75" tall. Can be mounted flat (table top style) or vertically with the control buttons facing up.



Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output*.
NOTE: We can only "stack" the exact same Xantrex models - we cannot stack say the SW3012 and the SW2012.

* AC source must be split phase, requires Stacking Cable (part# 808-9005)

Email us or call 604-510-0800 for more information

$2,439.70 USD*

Also available direct from Pinnacle Innovations for non-Lithionics battery projects from $2,960.70 CAD*.

Lithionics Programming Guide

Xantrex Installation Guide

Xantrex Customer User Guide

Xantrex Freedom SW 2012.
A powerful 12 Volt DC inverter-charger with 2,000 Watts continuous output at 120 Volts AC (4,000 Watts peak). Powerful 100 Amp battery charger and separate AC Inputs/ Output.

A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time.

Unit dimensions: 13.5" x 15.25" x 7.75" tall. Weight: 60.5 pounds. Can be mounted flat (table top style) or vertically with the control buttons facing up.

Simple and easy to install. See the similar 3,000 Watt version installed on our Installations Page.

Approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements. The Xantrex Fredom SW 2012 2,000 Watt inverter-charger measures 13.5" x 15.25" x 7.75" tall. Can be mounted flat (table top style) or vertically with the control buttons facing up.



Parallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output*.
NOTE: We can only "stack" the exact same Xantrex models - we cannot stack say the SW3012 and the SW2012.

* AC source must be split phase, requires Stacking Cable (part# 808-9005)

Email us or call 604-510-0800 for more information

$2,073.75 USD*
Price includes Xantrex System Control Panel plus 25' communication cable. Add $30.00 USD* for built-in GFCI outlet.

Also available direct from Pinnacle Innovations for non-Lithionics battery projects from $2,493.90 CAD*.

Photo below shows the 3,000 Watt version which looks the same as this 2,000 Watt inverter-charger.

Lithionics Programming Guide

 

Xantrex Installation Guide

Xantrex 809-0921.
A great way to see what is going on with your inverter-charger - including what condition your input power is. Requires Xantrex communications cable shown below to connect to Freedom Series 2012 and 3012 inverter-chargers.

Display gauge measures 4" x 6" x 1 9/16" deep but you need to allow about 4" on the backside for the cabling.

$369.70 CAD*

$39.00 USD*

Also available in a 75 foot cable 809-0942 for $53.00 USD*

• Charger: Programmable from 5 Amps to 80 Amps output.
• Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off.
• Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis.
• Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input.
• Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode.

$1,178.28 CAD*

Options:
Remote Panel 808-0817-01: $79.20 CAD*.
GFCI Option 808-9817: $41.20 CAD*
25' Remote Panel Cable 31-6257-00:
50' Remote Panel Cable 31-6262-00: $24.90 CAD*

• Charger: Programmable from 5 Amps to 50 Amps output.
• Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off.
• Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis.
• Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input.
• Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode.

$869.90 CAD*

Options:
Remote Panel 808-0817-01: $79.20 CAD*.
GFCI Option 808-9817: $41.20 CAD*
25' Remote Panel Cable 31-6257-00:
50' Remote Panel Cable 31-6262-00: $24.90 CAD*

 

$959.24 CAD*

• User configurable Low Voltage Disconnect from 10.0 Volts to 12.8 Volts DC.
• 2 year warranty.

$669.90 CAD*

Xantrex 806-1000.
The compact, easy-to-use and easy-to-install design of the PROwatt SW Series makes it ideal for use in commercial truck, RV and marine applications. It also meets UL458 marine supplement.

The PROwatt SW Series feature True Sine-Wave AC output with 540, 900 and 1800 continuous Watts respectively. With high surge capability, the PROwatt SW Series provides the necessary current to startup demanding electrical loads such as variable speed power tools, advanced electrical appliances, microwaves and much more.

In addition to dual GFCI AC receptacles, the PROwatt SW Series include an innovative USB connection for providing power to most USB chargeable devices. The PROwatt SW Series offers many safety features not found in similar inverters. When equipped with a remote control, the PROwatt SW Series has the ability to provide automatic ignition lockout shutting down the inverter's output when the vehicle's ignition is not engaged.

Power inverter providing AC power anywhere you need it. With True Sine-Wave output, the PROwatt SW Series can provide power for all types of electrical loads including, variable speed power tools, advanced electrical appliances, microwaves and much more. The PROwatt SW provides household AC power anywhere.

$465.00 CAD*

Also available in 600 and 2,000 Watt versions:

• Xantrex PROwatt SW600 806-1206 (600 Watts) $327.20 CAD*
• Xantrex PROwatt SW2000 806-1220 (2,000 Watts) $777.60 CAD*
• 2 year warranty.

Designed for recreational and industrial applications, expect the best performances from televisions, audio systems, variable speed tools, and any other electronics where you want nothing but the most optimal performance.

Offering superior quality true sine wave output, the Prosine 1000 and 1800 stand-alone power inverters are ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120 Volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.

2 year warranty.

$1,097.40 CAD*

Also available in a 2,000 Watt version for $2,079.90 CAD* (Part numbers Xantrex 806-1800 or Xantrex 806-1802).

OutBack Power Electrical Products and
Inverter-Charger List (All prices subject to change*)